CAPACITORS

MILLBORN capacitors is recognized as durability and Versatile Design. An in depth understanding to markets and the ability to respond with excellent products have consistency supported our graph our creative vision coupled with the ability to Translate the imaginations in to market winning products.





Running Capacitors :- These Capacitors are Manufactured with High Grade Heavy Edged Metalized Polypropylene Film. The film is wound into Capacitor roll on microprocessor controlled. Computerized high precision winding Machines in totally air-conditioned, Due Free winding room. The Winding is Externally tight so that there is no enough space between the Layer for corona to Occur. The Element are Sprayed on both ends with Zinc Metal to Connection of Metalized Electrodes. The Elements are assembled into Plastic / Metal cases and are Sealed for oil type capacitors oil is filled in metal case under Vacuum Millborn Power Capacitor and Running Capacitors from 72 mfd to 216 mfd are provided with Inductor coil to control the Inrush Current to the elements. This feature ensures long-term stability of capacitors.

Power Capacitors - MILLBORN capacitors is recognized as durability and Versatile Design. An in depth understanding to markets and the ability to respond with excellent products have consistency supported our graph our creative vision coupled with the ability to Translate the imaginations in to market winning products.

High Voltage Power Factor Correction Capacitors - These Units find Application in Improving Power factor in high voltage system in the range 1/1.1 Kv to 6.6 K.V. Capacitors rated at 1/1.1 K.V. find extensive application white carrying out heat run tests on large power transformers. There are still some old installation in India which use 2.2 K.V. Voltage System. The Capacitors Rated at 3.3 K.V. and 6.6 K.V. find Extensive application those used across large sized Motor Directly and those used in banks there numerous other application besides.

Technical Data
Standard Sizes 30,67,84 and 100 K.V.AR at 3.3 K.V., 1 Phase 50 Hz A.C. at 45 Degree C Ambient
Non Standard Sizes 42.56 and special rating at 1,1.1,1.91,2.2,3.81,4 and 7 KV 1 Phase or 3 Phase, 50 Hz ARC. at 50 Degree C Ambient or any Other Ambient
Permissible Tolerances On operating are +10% Maximum. On Output KVAr are + 5% to 10% On measured Loss Angles are +10%

MotorStart Capacitors -

Others Electrolytic Millborn MPET
Voltage 230V 250V
Surge Voltage 275V 230V
Tan Delta 4-7% <0.4%
230V With Stand <5 Min, <6 Min For prime quality, <3 Min for all the rest >45 Min.
275 With Stand <10 Sec. Max. >10 Min.
Start per hour Only 20 start per hour for not more than 3 seconds duration each. No restriction

Note : MPET can Reduce Motor cost by redesigning aux. Winding to get more Capacitors Volts.